Scanreco G3 Canbus with Joysticks JC and Walvoil DPX100 8 Sections radio remote control for forestry equipment
≈ $8,919
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 663 39...
Show
+48 663 399 034
Poland
Poland
Poland
Contact us and we will adapt the radio control to your machine.
--
Directional valve of the DPX series and the most versatile and complete. Highly configurable and versatile for applications such as Miniexcavators, Aerial platform, Truck Mounted Cranes, Telehandlers, Agricultural and Forestry machines.
- Valve model for high pressure applications (HP), inspheroidal graphite cast iron
- Optional spool position sensors
- Valve configurations with high flow sections (HF)
- Special inlet sections designed for steering applications
- Synergy with the Walvoil electronic systems range
- Inlet sections with or without by-pass valve
- Manual, hydraulic and proportional electro-hydraulic controls
Technical data:
Valve 8 sections:
Standard working conditions:
Max inlet flow : 50l/min
Max imput pressure : 350 bar
Max back pressure (T line) : 20 bar
Operating temperature range: -20°C / +80°C
Kinematic viscosity range : 10-300 Cst
Port dimensions:
Tank port T : G 1/2 BSP
Inlet port P: G 1/2 BSP
Service ports A1-A8 B1-B8: G 1/2 BSP
Drain port D : G 1/4 BSP
Proportional pressure reducting valve:
Supply Voltage: 12VDC (24VDCalso available)
Connector type: AMP JPT
PWM Frequency : 100Hz
--
Remote Radio Control Scanreco:
-1–8 linear levers or 1–4 joysticks. » Various toggle switches, pushbuttons and rotary switches.
- Operator feedback by:
- LEDs (light emitting diodes)
- Monochrome display 2.5" with 128 x64 px
- Stop function in accordance with EN ISO 13849-1 cat. 3, PL d.
- Cable control: Standard length 10 meters / ~33 ft
- Frequency bands: 433–434, 902–928 MHz & 2.4 GHz (other frequencies available on request).
- Operating range >100m / >
~330 ft.
» Operational temperature: –20°C to +70°C
/ ~–4°F to +160°F.
- Protection category: IP65. » Dimensions: (WxHxD): 350 x160 x190 mm / ~13.78 x6.30 x7.48 in (w/o color display).
» Weight: 1.9–2.6 kg / ~4.2–5.7 lbs. including battery
--
Technical Specifications of joysticks:
Power Supply Voltage : 10Vdc -30Vdc
Max current absorpion : 200mA ON/OFF output load
Wroking Temperature Range : -40°C + 70°C
Thumbwhell and analog input signals : 0.5 4,5 V
Abakig Uboyts Unoedabce: 11kOhm towards 2.5V
Max ON/OFF output current 700mA
Push button power supply voltage: 5 VVdc stabilized, max 30 mA, schort circuit protected
Infress Protection Rating : IP65
Connections: Molex minifit Jr 4p. (CAN and supply) + 10p. (aux inputs)
--
Technical Specifications of main driver:
Power Supply Voltage : 10Vdc÷30Vdc (inner 5x20 8A fuse type F8A)
Current absorpion : 300mA + load outputs (max 7.5A)
Wroking Temperature Range : -20 ÷+ 70 C
Supply for external poterntiometers: +5V - max current 50mA
PWM minimum current range : from 100 to 2500 mA
PweM maximum current range: from 100 to 2500mA
PWM frequency : 50-60-70-85-100-125-150-200-250-300 Hz
Analog inputs impedance: 11 KOhm towards 2.5V
Overlall dimensions with connector mounted: 256x210x45mm
Drill interasis : 242x142mm (n. 4 holes of 6mm diameter)